Smartflow Automatic Hand Dryer
Manufacturer Information:
Name or company: Pending update
Email: Pending update
Postal address: Pending update
City: Pending update
Country: Pending update
Responsible person information:
Name or company: Pending update
Email: Pending update
Postal address: Pending update
City: Pending update
Country: Pending update
Warnings and product safety information:
• Sensor operated by hand approximation.
• Suitable for medium traffic facilities.
• Compact, small size.
• Highest durability in its class.
• It normally goes along with a soap dispenser.
Place the hands under the air outlet grill. The dryer will start automatically, and go on with no interruption as long as the hands be kept in the detection range of the sensor. The appliance will stop 2 seconds after the hands are removed from the airflow.
| Voltage | 220-240 V |
| Frequency | 50 / 60 Hz |
| Electrical insulation | Class II |
| Dimensions | 258x 145x 138 mm |
| Weight | 1.2 kg |
| Effective airflow | 96 m3 / h 1600 l / min |
| Nominal flow rate | 110 m3 / h 1833 l / min |
| Air speed | 85 Km / h |
| Total power | 1.100 W |
| Engine | 150 W |
| Power Resistance | 950 W |
| Consumption | 4,8 A |
| r.p.m. | 15,000 |
| T. air (D = 10 cm / T amb = 21 º C) | 47 º C |
| Noise level (2 m) | 60 dB |
| Index protection | IP23 |
Between sink and door. It is recommended not to install between sink, or next to urinals, toilets and showers. On automatic models, when installed on a marble ledge, the minimum distance from the dryer to the ledge must be 400mm. It is recommended that hand dryers be distributed throughout the basin area to avoid overcrowding.
continue in UK
Ireland