Hospital & Clinic Furniture
Medical Material
Orthopedics
Physiotherapy and Rehabilitation
Beauty Equipment
Barber and Hair Salon
Massage and Spa
Tattoo Equipment
Dental Equipment
Health at Home
Disposables & consumables
Emergencies
Fitness and exercise
Office Supplies
Laboratory Equipment 
Veterinary Material
Saniflow Manual Operated Hand Dryer, Epoxy Steel White Finish
Manufacturer Information:
Name or company: Pending update
Email: Pending update
Postal address: Pending update
City: Pending update
Country: Pending update
Responsible person information:
Name or company: Pending update
Email: Pending update
Postal address: Pending update
City: Pending update
Country: Pending update
Warnings and product safety information:
The product complies with the General Product Safety Regulation.
- Warm air hand dryer.
- Push-button operated.
- Maximum power and airflow.
- Maximum robustness and vandal-proof.
- Suitable for very high traffic facilities.
- It normally goes along with a soap dispenser.
- Steel one-piece cover white epoxy coated, 1,5 mm thick. Cover fixed to the base by means of 2 vandal-proof lock screws and lock with special Saniflow ® wrench.
- Base in aluminium, 3 mm thick, with 4 Ø 8 mm holes for wall mounting.
- Fire resistant plastic UL 94-VO fan scroll.
- Universal brush motor, 5500 rpm, F class, incorporates a safety thermostat and a self-resetable thermal cut-off at 120 ºC.
- Aluminium centrifugal double symmetrical inlet fan wheel.
- Waved wire NiCr heating element on a mica frame that incorporates a self-resetable safety thermal cut-off at 80 ºC.
- Nozzle in chrome plated zamak, 22 μ thick.
- Push-button in chrome plated zamak, 22 μ thick, that activates an electronic timer with a 35 second cycle.
| Voltage | 220-240 V |
| Frequency | 50 / 60 Hz |
| Electrical insulation | Class I |
| Dimensions | 245x 276x 210 mm |
| Weight | 4.9 Kg |
| Effective airflow | 330 m3 / h / 5500 l / min |
| Nominal flow rate | 470 m3 / h / 7800 l / min |
| Air speed | 96 Km / h |
| Total power | 2250 W |
| Engine | 250 W |
| Power Resistance | 2000 W |
| Consumption | 10 A |
| r.p.m. | 5500 |
| T. air (D = 10 cm / T amb = 21 º C) | 53 º C |
| Noise level (2 m) | 70 dB |
| Index protection | IP23 |
Between sink and door. It is recommended not to install between sink, or beside
urinals, toilets and showers. On automatic models, when installed on a marble ledge, the minimum distance from the dryer to the ledge must be 400mm. It is recommended that hand dryers be distributed throughout the basin area to avoid overcrowding.
continue in UK
Ireland