Hand dryer, sensor operated, Saniflow, stainless steel, satin finish
Manufacturer Information:
Name or company: Pending update
Email: Pending update
Postal address: Pending update
City: Pending update
Country: Pending update
Responsible person information:
Name or company: Pending update
Email: Pending update
Postal address: Pending update
City: Pending update
Country: Pending update
Warnings and product safety information:
The product complies with the General Product Safety Regulation.
- Warm air hand dryer.
- Sensor-operated.
- Maximum power and airflow.
- Vandal-proof.
- Suitable for high usage frequency.
- Usually accompanied by a soap dispenser.
- One-piece housing, stainless steel AISI 304, satin finish, 1.5 mm thick. Assembled to the base by 2 vandal-proof screws and lock with special key provided by Saniflow ®.
- Aluminum base 3 mm thick, with 4 Ø 8 mm holes for wall mounting.
- Fire-resistant plastic UL 94-V0 fan scroll.
- Universal motor, 5500 rpm, Class F, includes thermal limiter, with sealed, self lubricating ball bearings.
- Aluminium centrifugal turbine, double-entry symmetric.
- Waved wire NiCr heating element, incorporates a thermal limiter.
- Chrome zamak nozzle, thickness 22 μm.
- Electronic detection sensor, infra-red beam, adjustable sensing distance.
Technical characteristics:
| Voltage | 220-240 V |
| Frequency | 50 / 60 Hz |
| Electrical insulation | Class I |
| Dimensions | 245 x 276 x 210 mm |
| Weight | 4.65 kg |
| Effective airflow | 330 m3/h / 5500 l/min |
| Nominal flow rate | 470 m3/h / 7800 l/min |
| Air speed | 96 Km / h |
| Total power | 2250 W |
| Engine power | 250 W |
| Heating element power | 2000 W |
| Consumption | 10 A |
| r.p.m. | 5500 |
| Air Tº (D = 10 cm / Env tº = 21 ºC) | 53 ºC |
| Noise level (2 m) | 70 dB |
| Protection index | IP23 |
Ideal location:
Between sink and exit door. It is recommended not to install between sink, or next to urinals, toilets and showers. On automatic models, when installed on a marble ledge, the minimum distance from the dryer to the ledge must be 400mm. It is recommended that hand dryers be distributed throughout the basin area to avoid overcrowding.

continue in UK
Ireland