Hand dryer, sensor operated, Saniflow, stainless steel, bright finish
Manufacturer Information:
Name or company: Pending update
Email: Pending update
Postal address: Pending update
City: Pending update
Country: Pending update
Responsible person information:
Name or company: Pending update
Email: Pending update
Postal address: Pending update
City: Pending update
Country: Pending update
Warnings and product safety information:
The product complies with the General Product Safety Regulation.
- Hand dryer, warm air.
- Automatic activation when hands are passed under.
- Maximum strength and power.
- Maximum anti-vandalism.
- Suitable for toilets of high frequency.
- Usually accompanied by a soap dispenser.
- Housing, one-piece stainless steel AISI 304, bright finish, 1.5 mm thick. Subject to the base by 2 screws anti-vandal security and lock with special key provided Saniflow ®.
- Base, Aluminum 3 mm thick, with 4 Ø 8 mm holes for wall mounting.
- Scroll plastic UL 94-V0 flame retardant.
- Motor, Universal, 5500 rpm, Class F, includes thermal limiting, with sealed ball bearings and self lubricating.
- Centrifugal, double-entry symmetric aluminum.
- Resistance, undulating wire of NiCr, incorporates a thermal limiter.
- Nozzle, chrome zamak, thickness 22 μm.
- Electronic detection sensor, infra-red beam, adjustable sensing distance.
| Voltage | 220-240 V |
| Frequency | 50 / 60 Hz |
| Electrical insulation | Class I |
| Dimensions | 245x 276x 210 mm |
| Weight | 4.65 kg |
| Effective airflow | 330 m3 / h / 5500 l / min |
| Nominal flow rate | 470 m3 / h / 7800 l / min |
| Air speed | 96 Km / h |
| Total power | 2250 W |
| Engine | 250 W |
| Power Resistance | 2000 W |
| Consumption | 10 A |
| r.p.m. | 5500 |
| T. air (D = 10 cm / T amb = 21 º C) | 53 º C |
| Noise level (2 m) | 70 dB |
| Index protection | IP23 |
Between sink and door. It is recommended not to install between sink, or next to urinals, toilets and showers. On automatic models, when installed on a marble ledge, the minimum distance from the dryer to the ledge must be 400mm. It is recommended that hand dryers be distributed throughout the basin area to avoid overcrowding.

continue in UK
Ireland