Sku: M99ACS

Hand dryer, sensor operated, Optima, stainless steel, satin finish

Hand dryer with automatic activation by hands approaching. Its use is indicated for bathrooms in hospitals, clinics or centres with great influx of people. Made of stainless steel, which makes it more resistant.
£224 38
Excluding VAT: £224.38
Free shipping Ship to:

Description

Description:
• Warm air hand dryer.
• Sensor operated.
• Suitable for medium facilities.
• Compact appliance.
• Highest durability in its class.
• It normally goes along with a soap dispenser.
Technical characeristics:
• Stainless steel AISI 304 one-piece high quality and high impact cover, 1,5 mm thick, satin finish. Cover fixed to the base by means of 4 Allen head screws.
• Engineering thermoplastic ABS UL 94-V0 base and fan scroll, with 4 Ø 8 mm holes for wall mounting.
• Induction motor, 2.800 rpm, maintenance-free and high durability, incorporates a safety thermostat and a self-resetable thermal cut-off at 130 ºC.
• PP UL94-V0 with single inlet fan wheel.
• Waved wire NiCr 40 heating element that incorporates a self-resetable thermal cut-off at 70 ºC.
• Two distances (15/25 cm) IR electronic detection sensor.
• Zamak air outlet grill.

Place the hands under the air outlet grill. The dryer will start automatically, and go on with no interruption as long as the hands are kept in the detection range of the sensor. The appliance will stop 2 seconds after the hands are removed from the airflow.

Voltage 220-240 V
Frequency 50/60 Hz
Electrical insulation Class II
Dimensions 302x 260x 150 mm
Weight 4.25 kg
Effective airflow 240 m³ / h 4.000 l / min
Nominal flow rate 280 m³ / h / 4670 l / min
Air speed 65 Km / h
Total power 1640 W
Engine 140 W
Power Resistance 1500 W
Consumption 7 A
r.p.m. 2800
T. air (D = 10 cm / T amb = 21 º C) 52 ° C
Noise level (2 m) 60 dB
Index protection IP23
Ideal location

Between sink and door. It is recommended not to install between sink, or next to urinals, toilets and showers. On automatic models, when installed on a marble ledge, the minimum distance from the dryer to the ledge must be 400mm. It is recommended that hand dryers be distributed throughout the basin area to avoid overcrowding.

£224 38