Hand dryer, sensor operated, Machflow, stainless steel, bright finish
Manufacturer Information:
Name or company: Pending update
Email: Pending update
Postal address: Pending update
City: Pending update
Country: Pending update
Responsible person information:
Name or company: Pending update
Email: Pending update
Postal address: Pending update
City: Pending update
Country: Pending update
Warnings and product safety information:
The product complies with the General Product Safety Regulation.
- High speed motor. Maximum air velocity 325 Km/h
- Ecological: very low power consumption
- Sensor operated
- Maximum air power and effective airflow
- Antivandalism features
- Stainless steel once-piece cover bright finish, 1.5 mm thick. Cover fixed to the base by means af 2 allen lock screws and lock with allen wrench.
- ABS base for wall mounting. It inclues 8 silent-locks to damp mechanical vibrations.
- High speed motor. Vacuum universal motor brush, F class, 19000-30000 rpm. RPM may be adjusted manually by means of a potentiometer.
- Vacuum aluminium inlet fan wheel.
- Heating element free.
- Automatic disconection system after 60 seconds of continuous use.
- Fully adjustable (5-20 cm) IR electronic detection sensor by means of a potentiometer
| Voltage | 220-240 V |
| Frequency | 50-60 Hz |
| Electrical insulation | Class I |
| Consumption | 3,3-4,7 A |
| Drying Time | 8.12 sec |
| Speed max. air | 325 Km / h |
| Total power | 420-1150 W |
| Protection Index | IP23 |
| Automatic shutdown | 60 sec |
| r.p.m. | 19.000-30.000 |
| Weight | 4,7 Kg |
| Noise level (to 2m) | 68-75 dB |
Between sink and door. It is recommended not to install between sink, or next to urinals, toilets and showers. On automatic models, when installed on a marble ledge, the minimum distance from the dryer to the ledge must be 400mm. It is recommended that hand dryers be distributed throughout the basin area to avoid overcrowding.

continue in UK
Ireland