Hand dryer, push-button operated, Saniflow, white porcelain enamelled
Manufacturer Information:
Name or company: Pending update
Email: Pending update
Postal address: Pending update
City: Pending update
Country: Pending update
Responsible person information:
Name or company: Pending update
Email: Pending update
Postal address: Pending update
City: Pending update
Country: Pending update
Warnings and product safety information:
• Push-button operated.
• Maximum power and airflow.
• Maximum robustness and vandal-proof.
• Suitable for very high traffic facilities.
• It normally goes along with a soap dispens
• Base in aluminium, 3 mm thick, with 4 Ø 8 mm holes for wall mounting.
• Fire resistant plastic UL 94-VO fan scroll.
• Universal brush motor, 5.500 rpm, F class, included a 2 A fuse with sealed and self-lubricated ball bearings.
• Aluminium centrifugal double symmetrical inlet fan wheel.
• Waved wire NiCr heating element on a mica frame that incorporates a self-resetable thermal cut-off at 80 ºC.
• Nozzle in chrome plated zamak, 22 μ thick.
• Push-button in chrome plated zamak, 22 μ thick, that activates an electromechanical timer with a 34 second cycle.
Press the button to initiate the drying process. The dryer will go on with no interruption for 35 seconds.
| Voltage | 220-240 V |
| Frequency | 50/60 Hz |
| Electrical insulation | Class I |
| Dimensions | 255x 282X 215 mm |
| Weight | 11.5 kg |
| Effective airflow | 330 m³ / h / 5500 l / min |
| Nominal flow rate | 470 m³ / h / 7800 l / min |
| Air speed | 96 Km / h |
| Total power | 2250 W |
| Engine | 250 W |
| Power Resistance | 2000 W |
| Consumption | 10 A |
| r.p.m. | 5500 |
| T. air (D = 10 cm / T amb = 21 º C) | 53 º C |
| Noise level (2 m) | 70 dB |
| Index protection | IP23 |
Between sink and door. It is recommended not to install between sink, or next to urinals, toilets and showers. On automatic models, when installed on a marble ledge, the minimum distance from the dryer to the ledge must be 400mm. It is recommended that hand dryers be distributed throughout the basin area to avoid overcrowding.
continue in UK
Ireland