Hand dryer, push-button operated, Saniflow, stainless steel, satin finish
Manufacturer Information:
Name or company: Pending update
Email: Pending update
Postal address: Pending update
City: Pending update
Country: Pending update
Responsible person information:
Name or company: Pending update
Email: Pending update
Postal address: Pending update
City: Pending update
Country: Pending update
Warnings and product safety information:
Push-button operated.
Maximum power and airflow.
Maximum robustness and vandal-proof.
Suitable for very high traffic facilities.
It normally goes along with a soap dispenser.
• Base in aluminium, 3 mm thick, with 4 Ø 8 mm holes for wall mounting.
• Fire resistant plastic UL 94-VO fan scroll.
• Universal brush motor, 5500 rpm, F class, incorporates a safety thermostat and a self-resetable thermal cut-off at 120 ºC.
• Aluminium centrifugal double symmetrical inlet fan wheel.
• Waved wire NiCr heating element on a mica frame that incorporates a self-resetable thermal cut-off at 80 ºC.
• Nozzle in chrome plated zamak, 22 μ thick.
• Push-button in chrome plated zamak, 22 μ thick, that activates an electronic timer with a 35 second cycle.
| Voltage | 220-240 V |
| Frequency | 50 / 60 Hz |
| Electrical insulation | Class I |
| Dimensions | 245x 276x 210 mm |
| Weight | 4.9 Kg |
| Effective airflow | 330 m3 / h / 5500 l / min |
| Nominal flow rate | 330 m3 / h / 5500 l / min |
| Air speed | 96 Km / h |
| Total power | 2250 W |
| Engine | 250 W |
| Power Resistance | 2000 W |
| Consumption | 10 A |
| r.p.m. | 5500 |
| T. air (D = 10 cm / T amb = 21 º C) | 53 º C |
| Noise level (2 m) | 70 dB |
| Index protection | IP23 |
Between sink and door. It is recommended not to install between sink, or beside
urinals, toilets and showers. On automatic models, when installed on a marble ledge, the minimum distance from the dryer to the ledge must be 400mm. It is recommended that hand dryers be distributed throughout the basin area to avoid overcrowding.
continue in UK
Ireland