Przenośny EKG, pamięć na 24 pomiary

IMPORTANT: This device only displays its menus in Spanish.

• The unit is suitable for personal use at home, not suitable for long term monitoring, but spot-checking or clinical patrol at medical institution or hospital.
• It can not be used to substitute the normal ECG examination or real time monitoring.
• The unit is suitable for patients that suffer from cardio-vascular disease or patients that suffer from diseases such as hypertension, myocardial infarctions, etc., which may accompany cardio-vascular disease.
• This unit is for adult use only.
• It can be used to monitor the heart working condition.
• If the measurement result is frequently abnormal, the user is advised to consult a doctor, so that the details or exact diagnosis can be analysed in time at hospital.
• This unit is not the monitor used in clinical institution or hospital, but is used for spot-check purpose ONLY.
• The measurement results are a useful reference for doctor, but do not make direct diagnostic or analytical decision based on the information provided by this unit.

Features:

- Two input connections for ECG signal:

• Embedded metal electrodes.
• Lead wire connector (optional).

- Two output modes for ECG data:

• LCD display
• Serial output interface.

- The features are described in detail as follows:

• Measure one lead of ECG easily at any time.
• ECG waveform is displayed clearly on the LCD screen.
• Can give some messages after ECG measurement, such as average HR (Heart Rate).
• 30-second ECG measurement for each record.
• 24 records can be stored, reviewed and sent to PC by a serial port.
• Shut down automatically while no key is pressed for longer than 35 seconds.
• Data records can be locked to avoid inadvertent deletion.
• Two new AAA size batteries can be used for more than 500 times measurement; the battery power status is indicated on the screen.
• Small in size and light in weight to carry.
• Easy to operate, especially suitable for old people.

Technical Parameters:

ECG Monitoring:

- The number of channels: single (differential input).

- Electrodes: 3 embedded metal electrodes or using 3 adhesive ECG electrodes by connection to the lead wire (optional).

- Body measurement: the detecting ECG signal can be the following lead selection:

• Lead I (between right hand and left hand);
• Chest Lead (between right hand and chest);
• Lead II (between right hand and left leg).

- Signal bandwidth: 0.5Hz~40Hz

- Internal noise level: ≤30μVp-p

- Heart rate measuring range: 30bpm~240bpm

- Heart rate measuring precision: ±2bpm or ±2%, whichever is greater.

- Display sensitivity: 4.8mm/mV±10%

- Common-mode rejection ratio (CMRR): ≥60dB

- Sweeping speed: 20mm/s±10%

Display:

• 128×64dot-matrix single color LCD
• Display dimension: 49mm×25mm
• Display of waveform: 128×48 pixels
• Backlight: LED backlight.

Data Memory:

• Data memory of up to about 30 seconds of ECG for every piece of record.
• Ability to Store up to 24 different results on record
• Able to transfer data records to the computer by data interface port (optional).

Dimensions and Weight:

• Dimensions: (L)115×(W)58×(H)18 mm
• Weight: 100g (including 2 AAA batteries)

Classification: This device is internally powered equipment and it has TYPE B applied part according to the degree of protection against electric shock.

Working Environment:

• Operating temperature: 5 º C ~ 40 º C
• Operating humidity: ≤80%
• Atmospheric pressure: 86 ~ 106kPa
• Power Supply voltage: 2.7VDC ~ 3.3VDC

Accessories included:

• A hanging cord
• Two batteries (AAA)
• A pouch
• A User Manual

Accessories not included:

• Ref. 902-C3ECG: An ECG lead wire.
• Ref. 902-USBSOFT80A: A Data Cable and software.
• Ref.153-YYW50: Circular electrodes for ECG with anchor clip (25 Units).
• Ref. 440-T817W: ECG Circular Electrodes with clip connector (30 Units).