Fotel stomatologiczny ze sprężarką i pompą ssącą

Dental chair with compressor and suction motor.

IINCLUDES:

• Vacuum motor.
• Compressor 30 L.
• Curing light.
• Ultrasonic cleaner.
• Halogen lamp.
• Two turbines.
• Micromotor.
• Contra.
• Handpiece.

This product is used in dental equipment suitable for professional use in dental clinics. The team is composed of a set of related dental equipment and components thereof, for the treatment, diagnosis and dental operations. The product includes the patient's dental chair, dental light, the instrument tray, 3-way syringe, spittoon and water system, suction, X-ray viewer and pedal.

Principle features:

Technical specifications:

• Rotational speed turbine handpiece high speed no load (air pressure 0.22 MPa) ≥ 35 × 104 r / min
• Rotational speed turbine handpiece at low speed with no load (air pressure 0.30 MPa) ≥ 18 × 103 r / min
• Lamp lighting Operating 8000Ix ~ 15000Ix
• Lighting ray viewer: ≥ 2000Ix
• Capacity dental chair: ≥ 1323N (135kg)
• Capacity of the tray of instruments: ≤ 5Kg
• The highest position of the chair from the ground: ≥ 700mm
• The lowest position of the chair from the ground: ≤ 500mm
• Range of movement of the back: 105 ° - 170 °
• Range extension of the head: 120mm
• The greater range of seat-back to back: ≥ 12 °
• Water heater temperature at a constant temperature (40 ± 5) ° C
• Workspace: 2600mm/altura length ≥ ≥ ≥ 2000mm 4000mm/ancho

Working conditions:

To verify the proper use of equipment, the entrance of air and water and power supply, you must meet the following
operating parameters:

• Air Supply: Air pressure: 0.6 MPa - 0.80 MPa, flow> 50L/min, oil;
• Water supply: water pressure 0.20 MPa-0.40MPa, flow> 10L/min, degree of stiffness <25 degrees.
• Power Supply: AC 220V ~ 230V, 50HZ/60Hz, 10A
• Environment: temperature 5-40 ° C, relative humidity 30% to 75%.

Space measurements needed to operate optimally:

• Minimum length:  4000 mm
• Minimum width:    2600 mm
• Minimum height:   2000 mm