Spirometer with touchscreen Datospir Touch Easy
Manufacturer Information:
Name or company: Pending update
Email: Pending update
Postal address: Pending update
City: Pending update
Country: Pending update
Responsible person information:
Name or company: Pending update
Email: Pending update
Postal address: Pending update
City: Pending update
Country: Pending update
Warnings and product safety information:
Manufacturer Information:
Name or company: Pending update
Email: Pending update
Postal address: Pending update
City: Pending update
Country: Pending update
Responsible person information:
Name or company: Pending update
Email: Pending update
Postal address: Pending update
City: Pending update
Country: Pending update
Warnings and product safety information:
Manufacturer Information:
Name or company: Pending update
Email: Pending update
Postal address: Pending update
City: Pending update
Country: Pending update
Responsible person information:
Name or company: Pending update
Email: Pending update
Postal address: Pending update
City: Pending update
Country: Pending update
Warnings and product safety information:
The product complies with the General Product Safety Regulation.
Spirometer with touch screen Datospir Touch Easy.
Occupational and primary care modes.
| Occupational care mode (OC) |
|---|
| Oriented for prevention and work place medical centres. Allows tests with FVC and bronchodilator, quickly and easily for the early detection of occupational lung diseases. |
| Primary care mode (AP) |
|---|
| Oriented for Primary Care centers. Allows main testing interactive aids for quality spirometry, similar to a specialized center (Quality control of spirometry). It allows the detection and monitoring of respiratory diseases most prevalent such as asthma or COPD. |
| Reference | Type of Transductor |
|---|---|
| 104-07054 | Disposable Transductor |
| 104-07056 | Turbine Transductor |
- Color touch screen with high resolution.
- Internal printer.
- Rechargeable.
- 2 operating modes: Primary Care and Occupational Medicine.
- Program quality control spirometry quality grades tests, verifying the accuracy and calibration program.
- Incentives adult and pediatric charts.
- Help.
- Integrated temperature sensor.
- USB connectivity (Bluetooth, Ethernet (1) and interoperability support HL7 (2) (spirometry CDA) optional).
- Suitable for telemedicine.
- PIN code available (for compliance with the Data Protection Act, Data Protection Act).
(1) Ethernet Connectivity for sending email testing and consulting
data remotely.
(2) HL7: Health Level Seven is an international standard for interoperability of information systems health. (By W20s software).
CDA: Clinical Document Architecture.
| Quality control programme of Spirometry |
|---|
The touch DATOSPIR incorporates an automatic quality control, based on the recommendations of the National Lung Health Education & Program (NLHEP).
• QC Prompts: For technical help in providing good instructions to the patient to obtain evidence of high quality spirometry. At the end of a move, a warning screen will inform you of the acceptability of the same.
• QC Grades: At the end of the test, will show a grade of A to F to indicate the reliability of the results, at the discretion NLHEP.
| Program of verification of exactitude |
|---|
The recommendation ATS / ERS 2005 advised to check the accuracy periodically volume spirometers.
To verify that the transducers measured correctly, the spirometer includes a simple verification procedure, which requires a few seconds.
| Data base | >1000 tests with graphics. |
| Spirometry Software | W20s Licence(Compatible with HL7 (CDA of Spirometry) |
| Connectivity/Interoperabilidad | USB to external printer and PC (OPCIONAL: Ethernet, Bluetooth, HL7 (CDA of spirometry)) |
| Accessories | 110x50mm thermal paper, plastic nozzle (only for ref. 104-07056), Bolsa cardboard mouthpieces (25u) (only for ref. 104-07056), Bag Disposable Transducers (25u) (only for ref. 104-07054), USB Cable PC / Printer, nose clip, Power Adapter, User Manual. |
| Range of measurement(BTPS) | Flow 0 ± 16 l / s, l Volume 0-10 |
| Exactitude (BTPS) | Flow 5% or 200 ml / s Volume: 3% or 50ml (ATS / ERS) |
| Dynamic resistance | 1,47 hPa (<1.5 cmH20) / (l/s) to 14 l/s |
| Screen | color touch high resolution VGA and 5.7-inch 640x480px |
| Printer | Thermal and graphic 112 mm |
| Rechargable Battery | Ni-Mh 10.8V 2500mAh. Works for 1.5h aprox. |
| No. operations per patient | 8 FVC, 8 VC, 8 MVV |
| Temperature-Humidity when working | 5 a 40ºC. < 85% (without condensation) |
| Power | 100 to 240V, 50 to 60Hz |
| Potency | 30W |
| Dimensions | 195x270x100 mm |
| Weight | 1.7 Kg |
| Storage temperature | -20ºC to 70ºC |
| Directive | 93/42/CEE sanitary products, Product Class IIa |
| Regulations | EN 60601-1:2006, EN 60601-1-2:2007, EN 60601-1-6:2007, EN ISO 10993-1:2009, EN ISO 23747:2009, EN ISO 26782:2009, EN 62304:2006, EN 62366:2008, EN 1041:2008, EN 980:2008, EN ISO 14971:2009, EN ISO 9919:2009 |
| 104-07062 | Internal database of 3000 tests with graphics for Datospir Touch |
| 104-06610 | Ethernet module for spirometer Datospir Touch |
| 104-07193 | Bluetooth module for spirometer Datospir Touch |
| 104-07060 | Brocho-constriction module for spirometer Datospir Touch |
| 104-07233 | Meteological station module for spirometer Datospir Touch |
| 104-07233 | Pulse oximeter module for spirometer Datospir Touch |
| 104-02484 | PIM - PEM Module |
| 104-08160 | Sniff module for spirometer Datospir Touch |
| 104-07238 | Rechargable battery for spirometer Datospir Touch |
| 104-02249 | Callibration syringe (3L) |
(Click on the reference to see the product)
