Professional stimulator Combo ultrasound, Tens and Ems 1-3 Mhz

• Controlled by microprocessor provides interferential (4-pole), premodulated (2-pole interferential), medium frequency (Russian waves), EMS and TENS
  waveforms.
• You can choose between several different amplitude modulation options.
• The interferential and premodulated modes offer frequency modulation as well as a static frequency option.
• It can provide electrical stimulation, ultrasound therapy or combination therapy.

Therapeutic ultrasound:

Application of therapeutic deep heat for the treatment of sub-chronic and chronic medical conditions:

• Pain relief, muscle spasms and joint contractures.
• Pain relief, muscle spasms and joint contractures that may be associated with:
  • Adhesive capsulitis
  • Bursitis with slight calcification
  • Myositis
  • Soft tissue injuries
  • Shortened tendons due to past injuries and scar tissues.
• Relief of sub-chronic, chronic pain and joint contractures resulting from:
  • Capsular tightness
  • Capsular wound healing

For TENS, Interferential and premodulated (IFC):

• Symptomatic relief of chronic intractable pain
• Reduction of inflammation
• Post-traumatic acute pain and edema
• Post-surgical acute pain and edema

Additionally for EMS and Russian waves:

• Relaxation of muscle spasms and edema reduction
• Prevention or retardation of disuse atrophy
•  Increasing local blood circulation
• Muscle re-education
• Maintaining or increasing range of motion
• Immediate postsurgical stimulation of calf muscles to prevent venous thrombosis

Technical specifications:

• LCD display
• Battery indicator
• Therapeutic mode selection: electrical stimulation, therapeutic ultrasound or therapeutic combo.

General specifications:

• Adapter supply voltage: 100V-240V, 47Hz-63Hz, 1.35A
• Adapter output: 15V 3A max.
• Adapter Dimensions: 143 x 73 x 40 mm
• Dimensions: 25 x 19 x  9 cm
• Environmental operation conditions: Temperature: 10 °C (50 °F) to 40 °C (104 °F); Relative humidity: 30% - 85%
• Storage and transportation conditions: Temperature: -10 °C (-4 °F) to 55 °C (131 °F); Relative humidity: 20% -90%
• Maximum treatment time: 60 minutes electrical stimulation
• Timer accuracy: ±3 %
• Classification of protection against electric shock: Class I medical equipment
• Classification of applied part: Type BF

Ultrasonic generator specifications:

• Frequency (Freq.):
  • 1MHz ±10%
  • 3 MHz ±10%
• Duty factor (Duty): 10%-100%, stepping 10%
• Pulse repetition rate: 100 Hz
• Treatment time: Max. 30 minutes
• Output power:
  • 0.5W-10.0W, when duty factor ≥ 80% for 5cm2
  • 0.5W-15.0W, when duty factor ≤ 70% for 5cm2
• Effective radiating area (AER): 5 cm²
• Effective intensity (max.): <3.0 W/cm2
• Indication accuracy: ± 20% (for any level above 10% of maximum)
• RBN (max.): <8.0
• Beam type: Collimated
• Material of sound head: Aluminium
• Waterproof grade: IPX7 only for ultrasound applicator

Waveform specifications: Interferential traditional (4 pole):

Waveform type: Bi-phasic square:

• Mode selection: CC (constant current) or CV (constant voltage)
• Vector:
  • Auto: 0% -100%
  • Manual: 0° - 90°
• Carrier frequency (C.F.): 4.0 kHz
• Sweep high beat frequency (Beat H.): (Beat L.) -150 Hz
• Sweep low beat frequency (Beat L.): 1 - (Beat H.) Hz
• Output Intensity:
  • 0-100 mA (CC, at 1k ohm load)
  • 0-100 V (CV, at 1k ohm load)
• Treatment time: 1-60 minutes

Interferential traditional (2 pole) mode:

• Waveform type: Bi-phasic square
• Mode selection: CC (Constant Current) or CV (Constant Voltage)
• Carrier frequency (C.F.): 2.5kHz
• Sweep high beat frequency (Beat H.): (Beat L.) -150 Hz
• Sweep low beat frequency (Beat L.): 1-(Beat H.) Hz
• Output Intensity:
  • 0-100 mA (CC, at 1k ohm load)
  • 0-100 V (CV, at 1k ohm load)
• Treatment time: 1-60 minutes
• Cycle time (cycle): Continuous, 5/5, 4/12, 10/10, 10/20, 10/30, 10/50
• Ramp time (Ramp): 2 seconds

TENS and EMS mode:

• Waveform type: Mono- or bi-phasic square
• Mode selection: CC (Constant Current) or CV (Constant Voltage)
• Frequency: 1-250 Hz.
• Frequency modulation (F.M.): 0-249 Hz
• Burst rate (Burst): 0-10Hz (7 pulse)
• Phase duration (P.Dur.): 30-400 μs
• Amplitude modulation (A.M.): 0% -100%
• Output intensity:
  • 0-100 mA (CC, at 1k ohm load)
  • 0-100 V (CV, at 1k ohm load)
• Cycle time (Cycle): Continuous,4/4, 4/8,7/7, 5/5, 4/12, 10/10, 10/20, 10/30, 10/50
• Treatment time: 1-60 minutes
• Ramp time: 1 second

Russian mode:

• Waveform type: Bi-phasic square
• Mode Selection: CC (Constant Current) or CV (Constant Voltage)
• Carrier Frequency (C.F.): 2,5 kHz
• Burst frequency (Freq.): 20-100 Hz
• Output Intensity:
  • 0-100 mA (CC, at 1k ohm load)
  • 0-100 V (CV, at 1k ohm load)
• Duty cycle: 10%, 20%, 30%, 40% y 50%.
• Cycle time: Continuous, 5/5,4/12,10/10,10/20, 10/30,10/50
• Treatment time: 1-60 minutes
• Ramp time: 1s, 2s, y 5s

Includes:

• Main unit
• 2 Rubber electrodes, 60 x 90 mm
• 2 Rubber electrodes, 70 x 110 mm
• 2 Electrode sponges, 70 x 100 mm
• 2 Electrode sponges, 80 x 120 mm
• 4 Self-adhesive electrodes, 50 x 50 mm
• 4 Self-adhesive electrodes, 50 x 100 mm
• Elastic wrap, 75 x 1200 mm
• Elastic wrap, 75 x 600 mm
• 2 Electrode wires (black/red)
• Adapter 100-240V~47-63Hz
• Power cord
• Electrical stimulation cable
• Electrode wire for ultrasound combination
• 5cm2 AER ultrasound applicator
• Operating instruction

Optional accessories that can be found on our webpage:

• Ref. PG472 Gelled adhesive electrodes for TENS and EMS. 32 mm diameter
• Ref. PG475 Gelled adhesive electrodes for TENS and EMS. 45 mm diameter
• Ref. PG471 Gelled adhesive electrodes for TENS and EMS. 50 x 50 mm
• Ref. PG473 Gelled adhesive electrodes for TENS and EMS. 75 x 50 mm
• Ref. PG476Gelled adhesive electrodes for TENS and EMS. 90 x 45mm
• Ref. PG474 Gelled adhesive electrodes for TENS and EMS. 100 x 50 mm
• Ref. PG479 Gelled adhesive electrodes for TENS and EMS. 130 x 50 mm
• Ref. 648-G4034 Conductive gel for electrical stimulators and ultrasound 1000 ml
• Ref. 057-G0084 Conductive gel for ultrasounds and ipl 5 litres
• Ref. 057-G008 Conductive gel for ultrasounds and ipl 260 ml
• Ref. 529-13692 Conductive gel for ultrasounds and ipl 1 litre bottle 

Certification:

• Directive 93/42/EEC on Medical Devices.