Digital holter recorder, bluetooth, walk200b
Manufacturer Information:
Name or company: Pending update
Email: Pending update
Postal address: Pending update
City: Pending update
Country: Pending update
Responsible person information:
Name or company: Pending update
Email: Pending update
Postal address: Pending update
City: Pending update
Country: Pending update
Warnings and product safety information:
Walk200b is a Holter map recorder, intended for performing Blood Pressure Outpatient Monitoring exams (or Holter exams) for 24 hours or more, for the control of blood pressure and the diagnosis of the patient's health status, except in circumstances in which a variation in cardiac function could create imminent danger to the patient. The use for which the device has been created is that carried out in a medical environment. The use of the appliance must be carried out by qualified personnel with adequate knowledge and the instructions contained in the User's Manual must be followed.
Includes cubeABPM holter MAP (Analysis Software)
Characteristics:
Walk200b is a 24-hour or longer ambulatory blood pressure recorder. walk200b is compatible with cubeabpm reading and analysis software, for which the specific documentation is sent. walk200b is an easy-to-use, lightweight, quiet and compact recorder to maximize patient comfort. In particular walk200b is characterized by:
- LCD display for displaying the measured values and service messages, function can be disabled via software;
- wireless connection to the PC with standard bluetooth technology;
- self-adaptive algorithm for cuff inflation control;
- event marker function and start / end day and night periods;
- contained dimensions and low noise level of the inflation pump.
Technical characteristics:
- Pressure value range: Systolic from 60 to 290 mmHg / Diastolic from 30 to 195 mmHg / Accuracy ± 3 mmHg in display measurement
- Static pressure range: 0 to 300 mmHg
- Rate range: 30 to 240 beats per minute
- Method: oscillometric
- Measurement range: 0,1,2,4,5,6,12 or up to 30 measurements per hour
- Measurement protocol: 2 groups of modifiable intervals
- Memory capacity: 300 measurements
- Battery capacity:> 300 measurements
- Record capacity: 48 hours
- Operating temperature: + 10 ° C to + 40 ° C
- Relative humidity: 15% to 90%
- Storage environment: -20 ° C to 50 ° C and 15% to 95% humidity
- Dimensions: 128 x 75 x 30 mm
- Weight: less than 240g battery included
- Power supply: 2 Ni-MH rechargeable batteries of 1.2 V each and min. 1500 mAh (AA) or 2 alkaline batteries 1.5 V (AA)
- PC interface: Bluetooth (Classe 1/100 m)
Basic equipment:
- Software CD rom
- Walk 200B recorder
- Sleeve for walk200b
- Carry bag
- 2 AA batteries
- User manual