Class B 18L autoclave, touchscreen LCD, USB, printer

New Class B autoclave with an 18-liter capacity, designed with the most advanced technology for sterilizing materials used in hospitals, laboratories, clinics, tattoo studios, etc. It features an intuitive and easy-to-use touchscreen for controlling all its operations, a printer, and a USB connection for data export.

Programs:

• Quick S
• Standard (B)
• Soft (B)
• Prion
• B&D Test
• Helix Test
• Vacuum test

Characteristics:

• Advanced technology and modern design.
• Touchscreen LCD display with accessible interface for complete control of the equipment.
• Automatic operation with several pre-programmed sterilization cycles.
• Medical stainless steel camera.
• Printer included and USB connection for exporting data to a USB flash drive (included).
• Tests: Bowie & Dick test, Helix test and vacuum test.
• Materials: wrapped, unwrapped, solid or hollow, porous.
• Water tank capacity: 2.5 L.

Safety devices:

• Circuit breaker
  • Protect the equipment from any possibility of power supply failure.
  • Action: Interrupt the power supply.
• Thermal circuit breakers
  • Protection against possible short circuits and possible overheating in the transformer's primary network
  • Action: Temporary interruption (until the temperature has dropped) in the winding.
• Safety valve
  • Protection against a possible increase in pressure inside the chamber.
  • Action: Steam release until a normal pressure level is restored.
• Micro switch to control the door status
  • It controls the door adjustment to start a sterilization cycle.
  • Action: Transmits the signal to alert about the incorrect position of the door
• Thermostat for the chamber heating elements.
  • Protection against possible overheating of the chamber's heating elements.
  • Action: Interrupts the power supply to the chamber's heating elements.
• Thermostat for the heating elements of the steam generator.
  • Protection against possible overheating of the heating elements of the steam generator.
  • Action: Interrupts the power supply to the steam generator resistors.
• Automatic leveling of the hydraulic system.
  • The hydraulic system will return to its natural pressure if the sterilization cycle is manually interrupted.
  • Action: Automatic restoration of atmospheric pressure inside the chamber
• Door lock
  • Effective protection to prevent accidental opening of the door.
  • Action: Prevents accidental opening of the door during the program

Technical data:

• Overall dimensions: 45 x 48.5 x 62 cm
• Camera dimensions: Ø 25 x 32.5 cm
• Net weight: 50 kg.
• Nominal power: 1750 VA.
• Frequency: 50 Hz.
• Circuit breaker: 400 V.
• Operating temperature: 5ºC ~ 40ºC
• Operating humidity: Max. 80% (non-condensing)
• Maximum noise level: <70 dB
• Atmospheric pressure: 76 kPa ~106 kPa

Included accessories:

• (x5) Trays.
• (x1) Base for trays.
• (x2) Drainage hoses.
• (x1) Door seal.
• (x1) Handle for trays.

Optional accessories and spare parts:

• 922-ROLLPAPER – Printer paper roll.