Hand dryer, sensor operated, Saniflow, stainless steel, satin finish
Manufacturer Information:
Name or company: Pending update
Email: Pending update
Postal address: Pending update
City: Pending update
Country: Pending update
Responsible person information:
Name or company: Pending update
Email: Pending update
Postal address: Pending update
City: Pending update
Country: Pending update
Warnings and product safety information:
The product complies with the General Product Safety Regulation.
- Warm air hand dryer.
- Sensor-operated.
- Maximum power and airflow.
- Vandal-proof.
- Suitable for high usage frequency.
- Usually accompanied by a soap dispenser.
- One-piece housing, stainless steel AISI 304, satin finish, 1.5 mm thick. Assembled to the base by 2 vandal-proof screws and lock with special key provided by Saniflow ®.
- Aluminum base 3 mm thick, with 4 Ø 8 mm holes for wall mounting.
- Fire-resistant plastic UL 94-V0 fan scroll.
- Universal motor, 5500 rpm, Class F, includes thermal limiter, with sealed, self lubricating ball bearings.
- Aluminium centrifugal turbine, double-entry symmetric.
- Waved wire NiCr heating element, incorporates a thermal limiter.
- Chrome zamak nozzle, thickness 22 μm.
- Electronic detection sensor, infra-red beam, adjustable sensing distance.
Technical characteristics:
| Voltage | 220-240 V |
| Frequency | 50 / 60 Hz |
| Electrical insulation | Class I |
| Dimensions | 245 x 276 x 210 mm |
| Weight | 4.65 kg |
| Effective airflow | 330 m3/h / 5500 l/min |
| Nominal flow rate | 470 m3/h / 7800 l/min |
| Air speed | 96 Km / h |
| Total power | 2250 W |
| Engine power | 250 W |
| Heating element power | 2000 W |
| Consumption | 10 A |
| r.p.m. | 5500 |
| Air Tº (D = 10 cm / Env tº = 21 ºC) | 53 ºC |
| Noise level (2 m) | 70 dB |
| Protection index | IP23 |
Ideal location:
Between sink and exit door. It is recommended not to install between sink, or next to urinals, toilets and showers. On automatic models, when installed on a marble ledge, the minimum distance from the dryer to the ledge must be 400mm. It is recommended that hand dryers be distributed throughout the basin area to avoid overcrowding.