Hand dryer, sensor operated, Machflow, stainless steel, bright finish
Manufacturer Information:
Name or company: Pending update
Email: Pending update
Postal address: Pending update
City: Pending update
Country: Pending update
Responsible person information:
Name or company: Pending update
Email: Pending update
Postal address: Pending update
City: Pending update
Country: Pending update
Warnings and product safety information:
- High speed motor. Maximum air velocity 325 Km/h
- Ecological: very low power consumption
- Sensor operated
- Maximum air power and effective airflow
- Antivandalism features
- Stainless steel once-piece cover bright finish, 1.5 mm thick. Cover fixed to the base by means af 2 allen lock screws and lock with allen wrench.
- ABS base for wall mounting. It inclues 8 silent-locks to damp mechanical vibrations.
- High speed motor. Vacuum universal motor brush, F class, 19000-30000 rpm. RPM may be adjusted manually by means of a potentiometer.
- Vacuum aluminium inlet fan wheel.
- Heating element free.
- Automatic disconection system after 60 seconds of continuous use.
- Fully adjustable (5-20 cm) IR electronic detection sensor by means of a potentiometer
| Voltage | 220-240 V |
| Frequency | 50-60 Hz |
| Electrical insulation | Class I |
| Consumption | 3,3-4,7 A |
| Drying Time | 8.12 sec |
| Speed max. air | 325 Km / h |
| Total power | 420-1150 W |
| Protection Index | IP23 |
| Automatic shutdown | 60 sec |
| r.p.m. | 19.000-30.000 |
| Weight | 4,7 Kg |
| Noise level (to 2m) | 68-75 dB |
Between sink and door. It is recommended not to install between sink, or next to urinals, toilets and showers. On automatic models, when installed on a marble ledge, the minimum distance from the dryer to the ledge must be 400mm. It is recommended that hand dryers be distributed throughout the basin area to avoid overcrowding.