Electro-stimulator with 2 channels and 5 modes

The R-C101W device is a Professional 5-in-1 Electro-Stimulator for Pain Relief and Muscle Recovery with advanced 5-in-1 electrotherapy technology to relieve pain, promote recovery and improve muscle performance.

It combines TENS, EMS, Interferential, Russian Current and Microcurrent therapies, offering solutions for both temporary pain relief and muscle stimulation, strengthening and re-education.

• TENS: helps to temporarily relieve acute and chronic pain through gentle electrical impulses.
• EMS: stimulates muscle contraction to strengthen muscles, prevent atrophy, and improve local circulation.
• Interferential (IF): uses medium frequency currents to reach deeper tissues with comfortable stimulation.
• Russian Current: designed to promote muscle strengthening and improve functional performance.
• Microcurrent (MIC): uses very low intensity currents to support the natural processes of tissue recovery.

With a dual output channel, it allows for the effective treatment of different areas of the body, making it ideal for rehabilitation, muscle recovery, pain relief, and improved mobility.

INTENDED USE

The device is designed for the temporary relief of pain, including acute and chronic pain. It is also designed to stimulate muscles to prevent muscle atrophy, strengthen and improve muscle function by increasing local blood circulation and facilitating muscle performance.

• It is used for the temporary relief of pain associated with sore muscles in the neck, shoulder, back, joints, hip, hand, abdomen, upper extremities (arm) and lower extremities (leg) due to strain from exercise or normal household activities.
• Relaxation of muscle spasms.
• Prevention or delay of disuse atrophy.
• Increased local blood circulation.
• Muscle re-education.
• Immediate post-surgical stimulation of the calf muscles to prevent venous thrombosis.
• Maintaining or increasing range of motion.

TECHNICAL SPECIFICATIONS

• Battery: 3.7V Li-ion battery
• Power supply: Input: 100-240V AC, 50/60Hz, 0.2A; Output: 5V DC, 300mA
• Output channel: Dual channel
• Waveform: MIC: Monophasic pulse square wave; Other: Biphasic square wave pulse
• Output current: TENS/EMS/RUSS: 0-90mAp; IF: 0-60mAp; MIC: 0-0.7mAp (At load: 1000 ohms)
• Output current: TENS/EMS/RUSS: 0-90Vp; IF: 0-60Vpp; MIC: 0-700mVp (At load: 1000 ohms)
• Treatment modes: TENS, EMS, IF, RUSS and MIC mode
• Operating conditions: From 5 °C to 40 °C with a relative humidity of 15% to 93%, atmospheric pressure of 700 hPa to 1060 hPa
• Storage conditions: -10 °C to 55 °C with a relative humidity of 10% to 95%, atmospheric pressure of 700 hPa to 1060 hPa
• Dimension: 120.5 x 69.5 x 27mm (L x W x H)
• Weight: approximately 155 g
• Classification: Applied part type BF, internal power equipment, IP22
• Electrode pad size: 50x50 mm, square
• Output accuracy: An error of ±20% is allowed for all output parameters
• Pulse Width (PW): TENS/EMS: 50 to 400 µS; RUSS: 200 µS; IF: 50µs/100µs; MIC: 2ms - 500ms
• Pulse Rate (PR): TENS/EMS: 2 to 150 Hz; MIC: 0.1 Hz - 150 Hz; RUSS: Carrier Frequency 2.5 KHz, Burst Frequency 10 Hz - 70 Hz; IF: Carrier Frequency 5 KHz/10 KHz, Beat Frequency 1 Hz - 199 Hz
• Treatment time: Adjustable, from 5 to 90 minutes
• Automatic shut-off: 1 minute
• Low battery indicator: A low battery indicator will appear on the LCD screen when the battery is low.
• Device lifespan: 5 years
• Electrode patch lifespan: 3 years